Although 37th street plays an important part in the story of the Southwest Calgary Ring Road, its discontinuous nature has meant that different parts of the road have played different roles throughout the history of the project. It is preciecly this segmentation, due to the presence of the Glenmore Reservoir, that has caused confusion over the role that 37th street plays. You will often hear comments that ’37th street was always meant to be used for the ring road’, and though partially true, in reality that only applies to the portion of the road south of the reservoir (pictured below).
As covered in a previous article, the section of 37th street north of the reservoir has been a residential road since Lakeview, the community in which it resides, was developed in the 1960s. Despite early use as a provincial road, It has never been approved as part of the Southwest Calgary Ring Road or the Sarcee Trail extension. The portion of 37th street south of the reservoir, however, is a different story. For this article, I will cover only the portion of the 37th street corridor from 90th avenue SW to Anderson road. The portion south of Anderson road, which has its own unique history, is covered here. Unless otherwise noted, when I mention ’37th street’ I am referring to the section of 37th street SW between 90th avenue SW and Anderson Road. Continue reading “37th street SW, 90th avenue SW to Anderson road”
If you can’t go around it, and you don’t want to go through or over it, what’s left? Going under it.
The tunneling of the Weaselhead was alluded by the Province of Alberta in 2011. Their ‘Plan B’ for a southwest Calgary ring road alternative route that did not require land from the Tsuu T’ina identified several non-traditional concepts for road building, including tunneled and elevated highway construction. However, the idea of a tunnel in the Weaselhead area is not new; it was first mentioned publicly almost 40 years ago. But while tunneling may technically be an option, is it realistic?
Continue reading “Tunneling the Weaselhead”
This is the fourth and final part of my overview of the Calgary Ring Road project, covering the period from 2000 to the current day. In many ways this is the period that moved the full ring road project from concept to reality. Despite a small portion having been built in the previous decade, work on a high-capacity, free-flowing provincial highway got underway in earnest after the turn of the millennium; work that is still ongoing today. (Click here for Part 1: 1956-1970, here for Part 2 1974-1976, and here for Part 3 1980-2001) As always, click on any of the maps for a larger view.
BECOMING A PROVINCIAL HIGHWAY
In 2000, the City of Calgary and the Province of Alberta signed an agreement that transfered the control of both the Deerfoot Trail and Stoney Trail to the Province. Despite the road originating in Provincial plans, and being primarily designed by the Province since the 1970s, the Calgary ring road had to this point been a City road. Continue reading “The Ring Road System – The Provincial Road (2001 to 2012)”
This is the third of a four part series on the history of Calgary’s ring road, covering the period when construction of the road first began. While this site continues to focus on the Southwest portion, I wanted to cover the history of the rest of the road, to provide some context to the story. Part one of this series (Initial Outlines) can be found here, and part two (Integrated Planning) can be found here.
After many studies, and many more years of planning, this period marked the first time that physical work on the project was undertaken, and the road was finally becoming a reality. Even with the route of the Transportation Utility Corridor (TUC) being largely set in the 1970s, the path to a finished road was never going to be straightforward. In this period there were (and still are) many issues to resolve, agreements to make, and studies to undertake. Despite the false-starts and the setbacks involved in the business of actually constructing a road, significant progress was made; the ring road went from being a line on a map to the beginnigs of a constructed freeway system that is currently close to being three-quarters finished. Continue reading “The Ring Road System – Implementation (1980 to 2001)”
While the City of Calgary, and later the Province of Alberta, had addressed the concept of a ring road network around Calgary before, it wasn’t until the 1970s that the idea was formalised into a singular road plan. (Much more on the early history of the road in part one of this four part series)
1974 CALGARY PARKWAY RING (Province of Alberta)
1974 saw the completion of the first comprehensive report on the Calgary Ring Road, known at this time as the Calgary Parkway Ring, which was produced by the firm of Deleuw Cather Consulting Engineers and Planners, on behalf of the Provincial government. This report not only laid out the route and general design of the road, but it also explored the need for the road itself, and the concept of the road as part of a larger system, integrated with other amenities such as public transportation and parks. Continue reading “The Ring Road System – Integrated Planning (1974-1976)”
In this series of four articles, I want to look at the history of the entire Calgary ring road system, not just the southwest portion. Though the Calgary Ring Road System we know today (Also currently known as Stoney Trail or Alberta Highway 201) has been largely constructed only in the last decade or so, its origins can be traced back to the 1950s and 1960s.
Click here for my summary of the earliest origins of the SW Ring Road (1953-1963).Ring road plans from 1953-1957 originated the concept of a regional bypass road network, and in 1959 portions of that plan were incorporated and approved in Calgary’s first ever transportation plan.
The concept of bypassing the Trans-Canada Highway traffic off of 16th avenue N and onto a more northerly road had been discussed essentially as soon as the Trans-Canada Highway was first routed through the City, and on September 19 1963, Alberta Highways Minister Gordon Taylor announced to a group of North Hill business owners that the Alberta government intended to build a northwest bypass west of Bowness. This section, the northwest bypass, would eventually become the precursor to the first section of the Calgary ring road to be built. However, these outlines were generally smaller piecemeal solutions to local transportation needs, and the planning had not yet reached the point of being a comprehensive design for a regional highway. That work would begin in the late 1960s, and progress in earnest in the 1970s.
Continue reading “The Ring Road System – Initial Outlines (1956 to 1970)”